(+34) 605 256 162 info@pavanaservices.com
0 Items

Nautical

Mantus Marine

BUY

Boat anchors, boat lights, anchor holders, diving equipment and other products.

Mantus anchors attach quickly and deeply with proven, reliable holding power and disassemble for easy storage.

www.mantusmarine.com

Mantus M1

  • Formed out of high-quality steel plate. Contains no cast parts.
  • Shank and shank boot are welded from top and bottom.
  • Shank and roll bar are bolted to the fluke.
  • ASTM certified steel bolts are oversized with a large margin to ensure safety.
  • Although the shank is attached to the fluke with 4 bolts, a single bolt has sufficient strength to handle the maximum expected load on the anchor.
  • Stainless Steel anchors feature a 2205 Duplex shank and 316L stainless steel fluke. The surface is hardened by shot-peening and then electro-polished to provide maximum corrosion resistance.
  • In the carbon steel version every part of the anchor system is hot-dipped galvanized for corrosion protection. (All shanks are HT ASTM 514 Steel and flukes are mild steel A36 equivalent).
  • Sharp-headed nose is precision machined to achieve the perfect chisel shape to achieve maximum penetrating power.

See dimensions table:

Mantus M2

  • Formed from high quality steel plate and high end precision casting.
  • ASTM certified bolts are oversized with a large margin to ensure safety.
  • Although the bolt used in the assembly is load bearing, only a fraction of the load is transmitted to the bolt.
  • Stainless Steel anchors feature a 2205 Duplex shank and 316L stainless steel fluke. The surface is hardened by shot-peening and then electro-polished to provide maximum corrosion resistance.
  • In the carbon steel version every part of the anchor system is hot-dipped galvanized for corrosion protection. (All shanks are HT ASTM 514 Steel and flukes are mild steel A36 equivalent).
  • Nose of the anchor is reinforced to guarantee a lifetime longevity.

See dimensions table:

Mantus Mini Scuba System

The Mantus dive system is designed to be compact, lightweight and easy to carry. It fits in a backpack (included) and allows you to dive with the freedom of movement of a free diver while breathing comfortably (proper dive certification/training is required for safe use).

Mantus Scuba Pack Features:

  • 3.5 Liter Aluminium Tank.
  • Can be pressurized to 3000 PSI.
  • First Stage Yoke RegulatorClassic piston regulator with the maximum working pressure of 3500 psi (232 bar).
  • Second Stage Regulator Main.
  • Non-adjustable second stage.
  • Comfortable silicone mouthpiece.
  • Underwater pressure gauge.
  • Light weight and Ergonomic Harness.
  • Back Pack.

Heavy duty, features drain holes for storing wet gear and a water proof compartment.

BUY

Image gallery